Vacon 100 flow Applications Manual

Table 92: Pump running time counter parameters
Index Parameter Min Max Unit Default ID Description
P3.15.19.1 Set Runtime Counter 0 1 0 1673
0 = No action
1 = Set the value that is
specified by P3.15.19.2
to the runtime counter
of the selected pump.
P3.15.19.2
Set Runtime Coun-
ter: Value
0 300 000 h 0 1087
P3.15.19.3
Set Runtime Coun-
ter: Pump Selection
0 8 1 1088
0 = All Pumps
1 = Pump (1)
2 = Pump 2
3 = Pump 3
4 = Pump 4
5 = Pump 5
6 = Pump 6
7 = Pump 7
8 = Pump 8
P3.15.19.4
Pump Runtime
Alarm Limit
0 300 000 h 0 1109
0 = Not Used
P3.15.19.5
Pump Runtime Fault
Limit
0 300 000 h 0 1110
0 = Not Used
Table 93: Advanced settings
Index Parameter Min Max Unit Default ID Description
P3.15.22.1 Staging Frequency P3.3.1.1 320.0 Hz 320.0 15545
P3.15.22.2
De-staging Fre-
quency
0.0 P3.3.1.2 Hz 0.00 15546
PARAMETERS MENU VACON · 179
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
5

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V