Vacon 100 flow Applications Manual

2 Go to the submenu Reset faults.
STOP
READY I/O
ID: M4.1
Diagnostics
( 39 )
Reset faults
( 0 )
Active faults
Fault history
3 Make a selection of the parameter Reset Faults.
STOP
READY I/O
ID: M4.2
Reset faults
Help
Reset faults
RESETTING WITH A PARAMETER IN THE TEXT DISPLAY
1 Go to the Diagnostics menu.
READY
FAULT
ALARM
STOP
RUN
KEYPAD
I/O
REV
FWD
BUS
2 Use the arrow buttons Up and Down to find the
parameter Reset Faults.
READY
FAULT
ALARM
STOP
RUN
KEYPAD
I/O
REV
FWD
BUS
FAULT TRACING VACON · 361
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
11

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V