Vacon 100 flow Applications Manual

P3.13.12.11 MULTI-SETPOINT 10 (ID 15570)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.12 MULTI-SETPOINT 11 (ID 15571)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.13 MULTI-SETPOINT 12 (ID 15572)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.14 MULTI-SETPOINT 13 (ID 15573)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.15 MULTI-SETPOINT 14 (ID 15574)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.16 MULTI-SETPOINT 15 (ID 15575)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.17 MULTI-SETPOINT SELECTION 0 (ID 15576)
Use this parameter to select the digital input signal that is used as a selector for the PID
Multi-setpoint function.
P3.13.12.18 MULTI-SETPOINT SELECTION 1 (ID 15577)
Use this parameter to select the digital input signal that is used as a selector for the PID
Multi-setpoint function.
P3.13.12.19 MULTI-SETPOINT SELECTION 2 (ID 15578)
Use this parameter to select the digital input signal that is used as a selector for the PID
Multi-setpoint function.
P3.13.12.20 MULTI-SETPOINT SELECTION 3 (ID 15579)
Use this parameter to select the digital input signal that is used as a selector for the PID
Multi-setpoint function.
VACON · 320 PARAMETER DESCRIPTIONS
10
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V