Vacon 100 flow Applications Manual

10.17 Maintenance counters 342
10.18 Fire mode 343
10.19 Motor preheat function 346
10.20 Drive customizer 347
10.21 Pump control 348
10.21.1 Auto-cleaning 348
10.21.2 Jockey pump 350
10.21.3 Priming pump 352
10.21.4 Anti-blocking function 353
10.21.5 Frost protection 353
10.21.6 Flow switch 354
10.22 Counters 355
10.22.1 Operating time counter 355
10.22.2 Operating time trip counter 355
10.22.3 Run time counter 356
10.22.4 Power on time counter 356
10.22.5 Energy counter 357
10.22.6 Energy trip counter 358
10.23 Advanced harmonic filter 359
11 Fault tracing 360
11.1 A fault comes into view 360
11.1.1 Resetting with the Reset button 360
11.1.2 Resetting with a parameter in the graphical display 360
11.1.3 Resetting with a parameter in the text display 361
11.2 Fault history 362
11.2.1 Examining the Fault history in the graphical display 362
11.2.2 Examining the Fault history in the text display 363
11.3 Fault codes 365
12 Appendix 1 380
12.1 The default values of parameters in the different applications 380
TABLE OF CONTENTS VACON · 11
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V