Vacon 100 flow Applications Manual

Table 105: The total counter parameters in the diagnostics menu
Index Parameter Min Max Unit Default ID Description
V4.4.1 Energy Counter Varies 2291
The quantity of energy
from the mains. You
cannot reset the coun-
ter.
In the text display: the
highest energy unit
that the display shows
is MW. If the counted
energy becomes more
than 999.9 MW, no unit
shows on the display.
V4.4.3
Operating Time
(graphical keypad)
a d
hh:min
2298
The operating time of
the control unit.
V4.4.4
Operating Time (text
keypad)
a
The operating time of
the control unit in total
years.
V4.4.5
Operating Time (text
keypad)
d
The operating time of
the control unit in total
days.
V4.4.6
Operating Time (text
keypad)
hh:min:
ss
The operating time of
the control unit in
hours, minutes and
seconds.
V4.4.7
Run Time (graphical
keypad)
a d
hh:min
2293
The motor run time.
V4.4.8
Run Time (text key-
pad)
a
The motor run time in
total years.
V4.4.9
Run Time (text key-
pad)
d
The motor run time in
total days.
V4.4.10
Run Time (text key-
pad)
hh:min:
ss
The motor run time in
hours, minutes and
seconds.
V4.4.11
Power On Time
(graphical keypad)
a d
hh:min
2294
The quantity of time
that the power unit is
powered on. You can-
not reset the counter.
V4.4.12
Power On Time (text
keypad)
a
The power on time in
total years.
V4.4.13
Power On Time (text
keypad)
d
The power on time in
total days.
VACON · 188 DIAGNOSTICS MENU
6
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V