Vacon 100 flow Applications Manual

Main menu
Submenus Submenus Submenus
Main menu Main menu
M2 Monitor
M1 Quick
setup
M1.1 Wizards (Content depends on P1.2, App select.)
M2.1 Multimonitor
M3.1 Motor Settings M3.2 Start/Stop Setup
M3.3 References M3.4 Ramps and Brakes M3.5 I/O Configuration
M3.6 FB Data Mapping
M3.10 Automatic Reset M3.11 Appl. settings M3.12 Timer Functions
M3.19 Drive Customizer
M3.13 PID Controller M3.14 Ext PID Ctrl M3.15 Multi-Pump M3.16 Mainten. cntrs M3.17 Fire Mode M3.21 Pump Control M3.18 Motor Preheat M3.7 Prohibit Freq M3.8 Supervisions
M3.9 Protections
M2.2 Trend Curve M2.3 Basic M2.4 I/O M2.5 Temperat. inputs M2.6 Extras/Advanced
M2.7 Timer Functions
M2.8 PID Controller M2.9 Ext PID Controller
M2.10 Multi-Pump
M2.11 Mainten.count.
M2.12 Fieldbus data
M3
Parameters
M8 User Levels
M7 Favourites
M4 Diagnostics
M5 I/O and Hardware
M6 User Settings
M4.4 Total Counters M4.5 Trip Counters M4.6 Software Info M5.1 Basic I/O M5.2...M5.4 Slots C,D,E M5.5 Real Time Clock
M5.6 Power unit sett.
M5.8 RS-485 M5.9 Ethernet
M6.1 Language select. M6.5 Parameter Backup M6.6 Parameter Comp.
M6.7 Drive Name M8.1 User Level M8.2 Access Code
Fig. 32: The basic menu structure of the AC drive
USER INTERFACES VACON · 91
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
3

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V