Vigor VS Series User Manual

(b) Programming by the STL
S10
S0 X0
SET S0
M9002
SET S10
T0
SET S11
S12
T2
SET S13
T2
K5
S11
RST
Y3
T1
SET S12
Activate the step S0.
When the contact T2=ON, the active
step transfers to S13.
Y5
SET
Y0
SET
Y3
T0
K20
T1
K80
S13
C0
K5
Y5
T3
K5
SET S14
T3
SET S12
C0
C0
When X0=ON, the active step transfers to S10.
Set A red light ON.
Set B red light ON.
Activate the coil of 2 Sec. timer.
When the contact T0=ON, the active step transfers to S11.
Activate the coil of
8 Sec. timer.
Activate the coil of
0.5 Sec. timer.
Activate the coil of 0.5 Sec. timer.
Activate the coil of 5 times counter.
Reset B red light to OFF.
B green light is lit.
When the contact T1=ON, the active step transfers to S12.
B green light is lit.
When the contacts T3=ON & C0=OFF,
the active step transfers to S12.
When the contacts T3=ON & C0=ON,
the active step transfers to S14.
Repeat this loop to let the
B green light ash for 5
times, by 1 Sec. cycle.
B green light is lit for 8 Sec.
B green light is lit
for 0.5 Sec.
T7
K5
T7
TRAN S18
S17
C1
K5
Y2
T8
K5
T8
C1
TRAN S19
T8
C1
TRAN S17
S17
S18
RST C1
Y1
T9
K50
T9
TRAN S10
S10
S19
A green light is lit for 0.5 Sec.
A yellow light is lit for 5 Sec.
Repeat this loop to let the
A green light ash for 5
times, by 1 Sec. cycle.
When the contact T7=ON, the active step transfers to S18.
When the contact T9=ON, the active step transfers to S10.
Activate the coil of 0.5 Sec. timer.
Activate the coil of 5 times counter.
Activate the coil of
0.5 Sec. timer.
A green light is lit.
Activate the coil of
5 Sec. timer.
A yellow light is lit.
When the contacts T8=ON
& C1=ON, the active step
transfers to S19.
When the contacts
T8=ON & C1=OFF,
the active step transfers
to S17.
112
Reset C1.
Continue on next page

Vigor VS Series Specifications

General

Brand	Vigor
Model	VS Series
Category	Controller
Language	English