363
1306-
0001
VS-485-EC
VIGOR
7-2-2 VS-485-EC Communication Expansion Card
The VS-485-EC Communication Expansion Card offers one set of non-isolated RS-485 port. By way of the parameter
setting and well planned program at the VS Series PLC Main Unit, the port can perform one of various communication
functions.
Product Exterior
Expansion Card
Connector
Serial Number
Fix Clip (lower)
485
VIGOR LOGO
RX TX
TRTR
SG
DD
Communication
Connecting Terminal
Communication Status
Indicator
30mm
64mm
25mm 15mm
No isolation
TX (transmitting) and RX (receiving)
50 M
Half-duplex
By the setting of installed project (115,200 bps. Max.)
DC5V 50mA (from PLC Main Unit)
By the installed project (via the "COM Port setting" page in the programming software)
Fixed 5mm Screw-Clamp Terminal Block
RS-485
Terminal Resistor
Connecting Terminal
Complete
Model Name
Manufacturer
120Ω, enabled when two TR terminals are short-connected
Fix Clip (upper)
Brief Model Name
Product Specification
Item
Specification
Communication Interface
Isolation Method
Communication Indicator
Max. Communication Distance
Communication Method
Baud Rate
Power Consumption
Wiring Method
Terminal Resistor
Parameter Conguration
To Next Page
Loading...
Need help?
General