Vigor VS Series - Expansion Card Related Components

VS-1PT-EC
VS-2PT-EC
VS-3AV-EC
VS-4AD-EC
VS-2DA-EC
VS-4A-EC
VS-3ISC-EC
VS-2TC-EC
VS-4TC-EC
Brief Voltage I/O Card: 2 channel (0 ~ 10V, 12-bit) inputs; 1 channel (0 ~ 10V, 10-bit) output;
with a calibrated DC 10V output; non-isolated
Analog Input Card: 4 channel (12-bit) inputs, each channel could output either –10 ~ +10V, 4 ~ 20mA or
–20 ~ +20mA; non-isolated
Analog Output Card: 2 channel (12-bit) outputs, each channel could input either –10 ~ +10V, 4 ~ 20mA
or –20 ~ +20mA; non-isolated
Analog I/O Card: 2 channel (12-bit) inputs + 2 channel (12-bit) outputs, each channel could input/output
either –10 ~ +10V, 4 ~ 20mA or –20 ~ +20mA; non-isolated
Inverter Speed Control Card: 3 channel (0.1% resolution) voltage outputs; totally isolated for each channel
Thermocouple Temperature Input Card: 2 channel (K, J, R, S, T, E, B or N type thermocouple, 0.2 ~ 0.3℃
resolution) inputs; non-isolated
Thermocouple Temperature Input Card: 4 channel (K, J, R, S, T, E, B or N type thermocouple, 0.2 ~ 0.3℃
resolution) inputs; non-isolated
PT-100 Temperature Input Card: 1 channel (3-wire PT-100, 0.1℃ resolution) input; non-isolated
PT-100 Temperature Input Card: 2 channel (3-wire PT-100, 0.1℃ resolution) inputs; non-isolated
★
VS -8XY - EC
VS -8X-EC
VS -8YT-EC
★
VS -4XY - EC
VS -4X-EC
★
VS -4Y - EC
VS -8XI -EC
VS -8YTI-EC
61
DIO Expansion Card: 4 DI (DC 24V); 4 DO ★; I/O by screw-clamp terminal
DI Expansion Card: 4 DI (DC 24V); output by screw-clamp terminal
DI Expansion Card: 8 DI (DC 24V); input by screw-clamp terminal
DO Expansion Card: 4 DO ★; output by screw-clamp terminal
DO Expansion Card: 8 DO (DC 24V, 300mA NPN transistor); output by screw-clamp terminal
DIO Expansion Card: 2 DI (DC 24V); 2 DO ★; I/O by screw-clamp terminal
DI Expansion Card: 8 DI (DC 24V); input by IDC connector
DO Expansion Card: 8 DO (DC 24V, 100mA NPN transistor); output by IDC connector
DIO
Expansion
Card
VS-485A-EC
VS-485-EC
VS-D232-EC
VS-D 485A-EC
VS-D 485-EC
RS-485 Comm. Expansion Card: One non-isolated RS-485 port with TX / RX indicators; dist. 50m Max.
RS-485 Comm. Expansion Card: One isolated RS-485 port with TX / RX indicators; dist. 1000m Max.
RS-485 Comm. Expansion Card: Dual non-isolated RS-485 ports with TX / RX indicators; dist. 50m Max.
RS-485 Comm. Expansion Card: Dual isolated RS-485 ports with TX / RX indicators; dist. 1000m Max.
RS-232C Communication Expansion Card: Dual non-isolated RS-232 ports with TX / RX indicators;
dist. 15m Max.; wiring by the RX / TX / SG terminals
VS-D52A-EC
VS-ENET-EC
RS-485 + RS-232C Communication Expansion Card: One isolated RS-485 port (1000m) &
one non-isolated RS-232C port (15m), both with TX / RX indicators and wiring by terminals
Comm.
Expansion
Card
Special
Function
Card
Expansion Card
Socket
Working Area
Available Card Type for the Socket
DIO Card CP Card SF Card *
EC1
EC2
EC3
M9260 〜 M9269
EC1X0 〜 EC1X7
EC2X0 〜 EC2X7
EC3X0 〜 EC3X7
EC1Y0 〜 EC1Y7
EC2Y0 〜 EC2Y7
EC3Y0 〜 EC3Y7
EC1D0 〜 EC1D19
EC2D0 〜 EC2D19
EC3D0 〜 EC3D19
D9260 〜 D9279
M9280 〜 M9289
D9280 〜 D9299
M9300 〜 M9309
D9300 〜 D9319
○
○
○
○
—
○ ○
○
* The VS-3AV-EC can ONLY be installed at the EC2 expansion socket otherwise it is ineffective. Except for the
VS-3AV-EC, the VS1 series can install one SF card only.
Special Component Simple Code
M9270 〜 M9279
M9290 〜 M9299
M9310 〜 M9319
VS Series PLC Expansion Cards
Main Specification
Model Name Item
The VS Series PLCs are equipped with one to three Expansion Card Sockets depending on the model. There are
congured with 20 special relays and 20 special registers for each Expansion Card Socket as the work area of the card.
For helping memory and convenience in use, every special component of the Expansion Card at a socket is given a
corresponding “Simple Code”. Hereafter, the “Simple Code” will be used in the following documents.
★ Selectable output: R: 2A Relay; T: 0.3A NPN transistor
2-16 Expansion Card Related Components
The Expansion Card Sockets are designed for exible expansions, on the upper side of the VS Series PLC. Which are
available to install DIO expansion cards to increase a small number of control points in a cost effective way. Also can
install the communication port (CP) expansion card to expand communication capabilities for linking with external
accessories of communication control. In addition, the special function (SF) expansion card is capable to perform
various special controls, such as position inspection, speed control, temperature control, etc. to present a complicated,
high-level control system.
Ethernet + RS-485 Communication Expansion Card: One Ethernet port (with additional non-isolated
RS-485, dist. 50m) & one non-isolated RS-485 port (dist. 50m), both with TX / RX indicators
○
(at the VS3 only)