Vigor VS Series - Programming Techniques

X0
Y0
X1
X21
Y0
X22
X20
˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙
1. Put a section which with longer serial connections of contacts at the upper place of a Parallel Connection Circuit
Blocks. This way will make the programming simpler and easier.
3-10-2 Programming Techniques
3. Although it is not an incorrect syntax to repetitively use an output coil ID number or Double Coil, the last output
operation is the real effective coil. Therefore, the structure of conditional signal contacts should be modified or the
output coils of the same ID number should be avoided.
2. It is recommended to place a circuit with more parallel connection of contacts on the left side.
LD
LD
AND
ORB
OUT
X0
X1
X2
Y0
LD
AND
OR
OUT
X1
X2
X0
Y0
LD
LD
OR
ANB
OUT
X0
X1
X2
Y0
LD
OR
AND
OUT
X1
X2
X0
Y0
or
X0
X2
Y0
X1 X0
Y0
X2X1
X0
Y0
X2
X1
X0
Y0
X2
X1
X0
Y0
X1
X21
X22
X20
X0
M0
M1
X1
X21
X22
X20
Y0
M1
M0
˙˙˙˙˙˙˙˙˙˙
˙˙˙˙˙˙˙˙˙˙˙
LD
AND
OUT
X0
X1
Y0
LD
OR
ANI
OUT
X20
X22
X21
Y0
LD
AND
OUT
X0
X1
M0
˙˙˙˙˙˙˙
LD
AND
LD
OR
ANI
ORB
OUT
X0
X1
X20
X22
X21
Y0
˙˙˙˙˙˙˙˙˙˙
LD
OR
ANI
OUT
X20
X22
X21
M1
LD
OR
OUT
M0
M1
Y0
˙˙˙˙˙˙˙
89
Ladder Diagram
Instruction List
Ladder Diagram
Instruction List
Ladder Diagram
Instruction List
Ladder Diagram
Instruction List
Ladder Diagram
Instruction List
Ladder Diagram
Instruction List