182
K2147483647
DHSCS K100 C254 IHC0
FEND
IRET
END
C254
M9000
IHC0
The IHC0
interrupt subroutine
Software High Speed Counter Interrupt
D
〜〜
The comparison result output of the DHSCS instruction can
also designate to an Interrupt Pointer of the Software High
Speed Counter that serviceable name is IHC0~IHC7. By way
of the pointer to perform the interrupt subroutine immediately.
In the example, when the present value of C254 = 100, CPU
will jump to the interrupt Pointer IHC0 once to perform the
interrupt subroutine.
When the M9061=“ON”, the Software High Speed Counter
interrupt IHC0~IHC7, will be prohibited.
To Next Page