EasyManua.ls Logo

Vigor VS Series - Page 366

Vigor VS Series
484 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
360
VB
Slave
VB
Slave
RS- 485
VB
protocol
VB
Slave
RS- 232
VB
protocol
RS- 485
VS
protocol
RS- 232
VS
protocol
The MODBUS Slave
When the VS PLC’s communication port has been set to the application type of the “MODBUS Slave”, the
human-machine interface (HMI) or supervisory control and data acquisition system (SCADA) can access the
VS PLC’s data through the “MODBUS protocol”.
RS- 485
MODBUS
protocol
MODBUS
Slave
RS- 232
MODBUS
protocol
MODBUS
Slave
MODBUS
Slave
RS- 485RS-232
The communication application types supported by the VS series PLC are briey introduced below:
The VS Computer Link Slave (hereby referred to as the VS Slave)
When the VS PLC’s communication port has been set to the application type of the “VS Computer Link Slave”, the
human-machine interface (HMI) or supervisory control and data acquisition system (SCADA) can access the
VS PLC’s data through the “VS Computer Link protocol” (hereby referred to as the VS Protocol).
VS
Slave
VS
Slave
VS
Slave
VS
Slave
VS
Slave
VS
Slave
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
VS series
PLC
HMI
or
SCADA
HMI
or
SCADA
HMI
or
SCADA
HMI
or
SCADA
HMI
or
SCADA
HMI
or
SCADA
VS
Master
VS
Master
The VS Computer Link Master (hereby referred to as the VS Master)
When the VS PLCs communication port has been set to the application type of the
VS Computer Link Master, it cooperates with the LINK instruction and a LINK communication table to
operate communication procedures. This Master links and communicates with Slaves through the
VS Computer Link protocol” (hereby referred to as the VS Protocol).
The VB Computer Link Slave (hereby referred to as the VB Slave)
When the VS PLCs communication port has been set to the application type of the
VB Computer Link Slave, the human-machine interface (HMI) or supervisory control and data
acquisition system (SCADA) can access the VS PLCs data through the “VB Computer Link protocol
(hereby referred to as the VB protocol).

Table of Contents