Vigor VS Series - 3. Basic Instruction; 3-1 Basic Instruction Table; 3-2 The LD, LDI, AND, ANI, OR, ORI, INV, OUT and END Instructions; 3-3 The LDP, LDF, ANDP, ANDF, ORP, OPF, MEP and MEF Instructions

91
91
92
93
91
91
87
88
88
89
96
96
97
97
99
101
98
105
105
107
110
121
119
121
123
124
102
102
103
94
95
95
94
125
125
131
139
3-9 The OUT and RST Instructions for the Timer or Counter
3-10 Significant Notes for Programming
3-10-1 Convert the Ladder Diagram to the Instruction List
3-10-2 Programming Techniques
4. Sequential Function Chart (SFC) and Step Ladder (STL)
4-1 What is the Sequential Function Chart (SFC)
4-1-1 The Framework of SFC
4-1-2 Basic Components of SFC
4-1-3 State and Action of SFC
4-1-4 Types of SFC
4-2 Compiling the Sequential Function Chart (SFC)
4-2-1 Create the Flowchart of the Sequential Procedures
4-2-2 Convert the Flowchart to the SFC
4-2-3 Use the Ladder Master S to Edit the SFC
4-3 Description the Application Types of SFC
4-3-1 Single Flow, Jump and Repeat Flow During the Flowchart Transfer
4-3-2 Selective Branch and Merge
4-3-3 Simultaneously Parallel Branch and Merge
4-3-4 Special Notices About the SFC
4-4 Precautions About the Composition of the SFC
4-5 STL / SFC Relevant Special Components
4-6-1 The Step Ladder Instruction (STL)
4-6 The Relationship Between the SFC and STL
4-6-2 Compare the Descriptive Methods Between the SFC and STL
4-7 Examples of SFC Applications
4-7-1 Construct the Repeat / Single Run / Single Step Control Modes for a Park Fountain
4-7-2 Filling Bottles
4-7-3 Trafc Lights
4-7-4 Mechanical Double-Decked Parking Space
5 General Rules of Application Instructions
5-1 The Formats of Application Instructions
5-2 Data Process of Application Instructions
5-3 Precautions of Using Application Instruction
6. Application Instructions
6-1 Application Instruction Table
6-2 Program Flow Instructions
6-3 Comparison, Move and Code Exchange Instructions