Vigor VS Series - 2. Component Descriptions; 2-15 The X0~X7 High Speed Input Function Description; 2-16 Expansion Card Related Components; 2-17 Special Function Module

35
36
37
39
42
42
47
53
54
55
58
61
62
70
56
52
63
65
71
72
73
74
75
76
77
78
79
79
81
82
83
85
86
86
84
32
33
33
32
2-9 Index Register (V and Z)
2-9-1 Using Index Register in Basic Instruction
2-9-2 Using Index Register in Application Instruction
2-9-3 Demonstration Program Using Index Register
2-10 Mark Pointer and Branch Pointer (P)
2-11 Table Nickname and Table Code (Q)
2-12 Interrupt Pointer (I)
2-13 Numerical System
2-14 Special Relay and Special Register
2-14-1 Table of Special Relay
2-14-2 Instruction Table of Special Register
2-14-3 Error Code Description
2-15 The X0~X7 High Speed Input Function Description
2-15-1 External Interrupt
2-15-2 Pulse Capture
2-15-3 Pulse Measurement
2-15-4 Hardware High Speed Counter
2-16 Expansion Card Related Components
2-16-1 The DIO Expansion Card Related Components
2-16-2 The Communication Expansion Card Related Components
2-16-3 The Special Function Expansion Card Related Components
2-17 Special Function Module
2-17-1 Buffer Memory BFM in the VS-4AD Module
2-17-2 Buffer Memory BFM in the VS-2DA Module
2-17-3 Buffer Memory BFM in the VS-3A Module
2-17-4 Buffer Memory BFM in the VS-6A Module
2-17-5 Buffer Memory BFM in the VS-4TC Module
2-17-6 Buffer Memory BFM in the VS-8TC Module
2-17-7 Buffer Memory BFM in the VS-2PT Module
2-17-8 Buffer Memory BFM in the VS-4PT Module
3. Basic Instruction
3-1 Basic Instruction Table
3-2 The LD, LDI, AND, ANI, OR, ORI, INV, OUT and END Instructions
3-3 The LDP, LDF, ANDP, ANDF, ORP, OPF, MEP and MEF Instructions
3-4 The ANB and ORB Instructions
3-5 The MPS, MRD and MPP Instructions
3-6 The MC and MCR Instructions
3-7 The SET and RST Instructions
3-8 The PLS and PLF Instructions