EasyManua.ls Logo

WAREMA climatronic - Target Group; Retrofitting and Modifications

WAREMA climatronic
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
890370_0•en•01.06.2009
We reserve the right to carry out improvements
10
WAREMA climatronic
®
Installation Instructions
2.3 Target group
These instructions address persons installing, wiring or connecting the
WAREMA climatronic, including all necessary parts, to the mains voltage.
The user instructions (art. no. 890033) are available for persons operating,
setting or commissioning the control.
WARNING
Mounting, connection, commissioning or operation by persons who are
not sufficiently qualified and informed can cause severe damage to the
system and may even result in personal injury.
Installation and commissioning may therefore only be performed by properly
trained qualified technicians. These technicians must be able to recognize
dangers that may be caused by the mechanical, electrical or electronic
equipment.
Persons installing or connecting the control must know and have understood
the content of these instructions and the operating instructions (art. no.
890033).
2.4 Retrofitting and
modifications
We have designed and built the WAREMA climatronic with reliability and
safety in mind. All required settings are made at initial commissioning. Modi-
fication of the unit parameters is therefore only required when the character-
istics of the control need to be adjusted, changes are made to the sensor
equipment or the control itself is replaced.
WARNING
Retrofitting and modifications may impact the safety of the system or
reduce its effectiveness! Possible consequences may include death,
serious or light injuries, property or environmental damage.
Therefore, contact us or your specialist dealer before retrofitting or changing
the system or the unit parameters if you cannot find any information on the
corresponding topic in the control unit documentation. This is the only way to
ensure trouble-free retrofitting/modification.
Exercise special care when components of different versions are combined
or when existing components are replaced by older/newer products with a
different scope of functions or a different software version.
Safety instructions

Table of Contents

Related product manuals