WAREMA climatronic - Switch Actuator Outputs

890370_0•en•01.06.2009
We reserve the right to carry out improvements
32
WAREMA climatronic
®
Installation Instructions
5.1 Switch actuator
outputs
Each controllable product requires 1 to 3 output terminals:
 Sun shading products and windows use 2adjacent outputs of a terminal
block and 2inputs of the same number, e.g. A1.1, A1.2, E1.1, E1.2
 Fans and lights use 1 output and 1 input of the same number, e.g. A1.1,
E1.1
 Infinitely variable fans (external) and dimmable lights use 2 adjacent outputs
of a terminal block and 1 input with the same number as the first output, e.g.
E3.2, A3.2, A4.1
 Fans 6/12 V, fans 3 steps, and fans 3 steps with valve use 3 adjacent out-
puts of a terminal block and 1 input of the number of the first output, e.g. E
5.2, A 5.2, A 6.1, A 6.2
NOTE All outputs for one products are always located on the same terminal block.
In product management, each product can be allocated any locking contact
of the same actuator.
 To plan and document the inputs and outputs and the locking contacts, use
the tables in Chapter 5.3 on page 34.
Connection information