890370_0•en•01.06.2009 We reserve the right to carry out improvements
11
2.5 Working safely
WARNING
The electrical installation must be performed by a certified electrician in
accordance with the electrical installation regulations published by the
Association of German Electrical Engineers (VDE 0100) or the standards
and regulations of the country in which the device is being installed. The
specialist must observe the installation instructions included with the
electrical device.
Whenever you intend to carry out work on motor-operated windows or build-
ing facades on which motor-operated sun shading products are installed,
carry out the following steps first:
Switch the system to a de-energised state.
Make sure that the unit has been sufficiently secured against unauthorised or
unintentional reactivation.
In any case, use suitable safety devices for personal protection.
Never place or store any items in the motion area of automatically operated
mechanisms (e.g. ladder against a house wall with an articulated arm awn-
ing).
WARNING
States of danger, malfunctions and material damage to the system are
possible due to improperly executed mounting, connection, repair or
maintenance work.
Such work may only be carried out by the service department or by author-
ised qualified personnel.
Only use such spare/replacement parts for maintenance or repair work as
have been approved by the manufacturer of the system.
WARNING
Dangerous situations, malfunctions and property damage to the unit may
result if connections are disconnected during operation! All connections
are required for proper operation of the control.
For this reason, de-energise the entire unit before plugging in or detaching
connecting lines.
WARNING
Danger to life and property damage through sudden movement of the
mechanism!
Safety instructions
To Next Page
Loading...