WAREMA climatronic - Concept

890370_0•en•01.06.2009 We reserve the right to carry out improvements
15
3.3 Concept
Before you install and start the WAREMA climatronic, this chapter will explain
the basic concept of the system and familiarise you with the many options
and the complex projects it can be used to realise.
Product 1 (external venetian
blind 1 south)
Channel 1 (external venetian
blind 1 south)
Group 1 (channel 1+2) Scene 1
Product 2 (external venetian
blind 2 south)
Product 3 (external venetian
blind 3 west)
Product 4 (external venetian
blind 4 west)
Product 5 (external venetian
blind 5 west)
Product 6 (external venetian
blind 6 east)
Product 7 (awning 1, roof)
Product 8 (light, living area)
Product 9 (external venetian
blind 7 north)
Product 10 (external venetian
blind 8 north)
.
.
.
.
Channel 2 (external venetian
blind 2 south)
Channel 3 (external venetian
blind 3 west)
Channel 4 (external venetian
blind 4+5 west)
Channel 5 (external venetian
blind 6 east)
Channel 6 (external venetian
blind 7+8 north)
Channel 7 (awning, roof)
Channel 8 (light, living area)
.
.
.
.
.
.
Group 2 (channels 3+4)
Group 3 (channels 1–6)
.
.
.
.
.
.
.
.
.
.
.
Scene 2
Scene 3
Scene 4
Product 1200 Channel 32 Group 32
Products are considered to be
all connected power consumers
(e.g.: sun shading product, light,
window, fan)
Any number of products can
be allocated to channels (e.g.:
channel 6, external venetian
blind north).
Any number of channels can
be organised into groups (e.g.:
group 3, all external venetian
blinds)
Any number of channels can be
organised into scenes; these
channels move to a position that
is previously learned in for a set
dwell time.
Setting of:
Contact allocation
Run times
Slat angle
Local pushbutton operating
mode
Setting of:
Product type
Safety functions (wind, ice)
Comfort functions
(precipitation, time, photo, dawn/
dusk, temperature, slat tracking)
Fig. 3 Properties of products, channels, groups and scenes
Introduction