890370_0•en•01.06.2009 We reserve the right to carry out improvements
95
8.3.2.2 Ice monitor
Ice monitoring prevents the sun shading product from freezing when
there is a threat of ice and from becoming damaged by subsequent
move commands. When there is precipitation at cold temperatures, the
WAREMA climatronic moves the sun shading products to an adjustable posi-
tion before ice can form in the guide rails. An ice alarm blocks both manual
operation and the comfort functions.
Depending on the product type, ice monitoring is factory-deactivated or acti-
vated (for articulated arm awnings, conservatory awnings and external vene-
tian blinds, for example, it is activated).
Prerequisite for ice monitoring: A weather station must be connected. If the
outside temperature drops below an adjustable value and the weather station
reports precipitation, the sun shading products are moved to the set position
and blocked there.
Ice monitor ON/OFF
This menu provides the option to activating or deactivating the ice monitor-
ing.
CAUTION
We recommend activating the ice monitor for outside sun shading products
such as external venetian blinds, roller shutters and awnings to prevent
damage to the system.
Limit value ICE
You can specify exactly from which temperature the ice alarm shall be trig-
gered. In the event of precipitation and when the temperature drops below
the set limit value, the sun shading product is moved to the set position
and remains there until the ice alarm is cancelled. The setting range is 0 to
+10°C.
Information on how to move the sun shading product despite the alarm is
provided under "Manual reset of ice alarm" below.
Main menu
Settings
Authorised dealer
Project setup
Manage channels
Channel n
Safety functions
Ice monitor
Channels
To Next Page
Loading...