890370_0•en•01.06.2009
We reserve the right to carry out improvements
112
WAREMA climatronic
®
Installation Instructions
After the tableau interface has been set up, you can set up all inputs and al-
locations using the PC software; follow the instructions in the software docu-
mentation.
NOTE The tableau interface is not supported by the assistant in the control panel or
the PC software. If you start the assistant after the tableau interface has been
set up, existing settings will be overwritten. The assistant can only be used to
create basic settings of the WAREMA climatronic before the tableau interface
is set up.
Tableau interface
To Next Page
Loading...