Xerox Phaser 3330 Service Manual

Troubleshooting
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
2-50
3. Enter dC330 Component Control, code
08-500 to check if the Registration Sensor
(08-130) is connected and working. If
necessary, install a new sensor (PL 3.1A.20,
Parts List 3.1A Frame (2 of 2)).
Does the error persist?
Go to step 4. Complete.
4. Clean the Registration Roller using a slightly
damp (water only) lint free cloth. Install a
new Registration Roller if it is damaged, (PL
3.1A.16, Parts List 3.1A Frame (2 of 2)).
Does the error persist?
Go to step 5.. Complete.
5. Enter dC330 Component Control, code
04-100 to check the Main Drive Motor.
The motor runs?
Go to step 6. Install a new BLDC
Motor, (PL 3.5.1, Parts
List 3.5 Drive).
Go to step 6.
6. All gears in the Main drive Assembly rotate
when the Main Drive Motor runs?
Go to step 7. Install a new Main Drive
Assembly, (PL 3.5.18,
Parts List 3.5 Drive).
Go to step 7.
7. Does the error persist? Install a new Main PWB:
• Phaser 3330 (PL
1.0.7, Parts List 1.0
Phaser 3330 Main)
• WorkCentre 3335 and
3345 (PL 6.1.7, Parts
List 6.1 WorkCentre
3335/3345 Main).
Complete.
Step Actions and Questions Yes No

Xerox Phaser 3330 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 1200 x 1200 dpi
First Page Out Time	As fast as 6.5 seconds
Monthly Duty Cycle	Up to 80, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	600 MHz
Memory	256 MB
Paper Output Capacity	150 sheets
Print Languages	PCL 5e, PCL 6, PostScript 3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Maximum Paper Size	8.5 x 14 in (Legal)
Weight	10.6 kg