5/2011
4-29
Phaser 4600/4620 Printer Service Manual
REP 7.5
Repairs
Revision - Xerox Internal Use Only
Figure 2 Remove the Tray 1 cover
4. Rotate the Tray 1 guide to its lowest point to release the guide from the Front Cover, Fig-
ure 3.
Figure 3 Remove the Tray 1 guide
5. Remove the screw that secures the Separator Roller Assembly to the feeder, Figure 4.
Figure 4 Remove the Tray 1 Separator Roller Assembly screw
Replacement
Hold the No Paper Sensor Actuator in while during Separator Roller Assembly installation. The
actuator should rest behind the Separator Roller Assembly, Figure 5.
To Next Page
Loading...
