5/2011
6-16
Phaser 4600/4620 Printer Service Manual
GP 17
Revision - Xerox Internal Use Only
General Procedures/Information
GP 17 Installation Space Requirements
WARNING
Do not work in a confined space. 1 m (39 inches) space is needed for safe working.
WARNING
USA and Canada. Do not install this machine in a hallway or exit route that does not
have 1.12 m (44 inches) of space additional to the normal space requirements in front of
the machine. To conform with fire regulations this additional 1.12 m (44 inches) of space
is needed in front of the machine in hallway and exit route
Space Requirements
Figure 1 shows the required amounts of space needed to properly operate and service the
machine.
1. In order to function properly, the printer must be placed on a flat surface with the following
minimum clearances, Figure 1.
Figure 1 Minimum Clearances
2. Mounting surface flatness must be within the specified range.
3. The printer must not be tipped or tilted more than 10 mm in either direction.
Figure 2 Tilting Specifications
Dimensions
Table 1 Print Engine
Dimensions N/ DN/ DT
Width 18.3 in. (46.4 cm)
Depth 20.5 in. (52.1 cm)
Height 16.4 in. (41.9 cm)
Weight 66.0 lbs. (30.2 kg)
To Next Page
Loading...
