Xerox Phaser 4620 - REP 12.10 Left Tamper Home Position Sensor

5/2011
4-136
Phaser 4600/4620 Printer Service Manual
REP 12.9, REP 12.10
Revision - Xerox Internal Use Only
Repairs
Figure 2 Remove the shaft from the bracket
REP 12.10 Left Tamper Home Position Sensor
Parts List on PL 12.35 Item 10
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer, GP 14.
2. Remove the Left Cover, REP 12.1.
3. Release the hook and disconnect P/J118 to remove the sensor., Figure 1.
Figure 1 Remove the Left Tamper Home Position Sensor