5/2011
4-137
Phaser 4600/4620 Printer Service Manual
REP 12.11
Repairs
Revision - Xerox Internal Use Only
REP 12.11 Finisher Right Cover
Parts List on PL 12.10 Item 2
Removal
NOTE: The option harness is fed through the Right Cover and retained by a small cover.
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer, GP 14.
2. Remove 3 screws (1 metal, 2 plastic) that secure the cover, Figure 1.
Figure 1 Remove the right cover screws
3. Release 2 hooks that secure the option connector cover to the Right Cover and remove
the harness through the slot provided,
Figure 2 Release the option connector and harness
To Next Page
Loading...
