5/2011
4-118
Phaser 4600/4620 Printer Service Manual
REP 11.3
Revision - Xerox Internal Use Only
Repairs
REP 11.3 Mailbox Right Cover
Parts List on PL 11.10 Item 2
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Mailbox Output Trays, REP 11.1.
2. Separate the Mailbox from the printer, GP 14
3. Remove 1 screw and release 1 hook that secures the cover to the Mailbox, Figure 1.
Figure 1 Remove the right cover
4. Disconnect P/J 1 on the Mailbox Control Board,
Figure 2 Disconnect the Mailbox connector
To Next Page
Loading...
