5/2011
4-76
Phaser 4600/4620 Printer Service Manual
REP 8.46, REP 8.47
Revision - Xerox Internal Use Only
Repairs
Figure 5 Remove the Feed Assembly
REP 8.47 HCF Feed Assembly
Parts List on PL 8.25 Item 16
Removal
WARNING
Use safe handling procedures when removing the module. Refer to GP 15. The module
is heavy.
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove any installed finishing options from the IOT, GP 14.
2. Separate the HCF feeder from the printer, GP 15.
3. Remove the HCF rear cover, REP 7.38.
4. Remove the HCF right cover, REP 7.39.
5. Remove the HCF left cover, REP 7.40.
6. Remove the HCF top plate, REP 7.49.
7. Remove 4 (plastic) screws that secure the HCF Feed Assembly to the top plate, Figure 1.
Figure 1 Remove the HCF Feed Assembly
To Next Page
Loading...
