5/2011
4-139
Phaser 4600/4620 Printer Service Manual
REP 12.13, REP 12.14
Repairs
Revision - Xerox Internal Use Only
Figure 2 Remove the switch bracket screws
5. Slide the insulation off the switch terminals and using a small screwdriver, release the har-
ness connectors from the switch, Figure 3.
Figure 3 Remove the harness from the switch
REP 12.14 Stapler Assembly
Parts List on PL 12.45 Item 1
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer, GP 14.
2. Remove the right cover, REP 12.11.
3. Disconnect P/J122 and P/J123 from the Stapler Assembly, Figure 1.
Figure 1 Disconnect the Stapler Assembly
4. Remove 2 screws (metal) that secure the Stapler to the bracket, Figure 2.
To Next Page
Loading...
