Xerox Phaser 4620 - REP 11.1 Mailbox Output Tray; REP 11.2 Mailbox Left Cover

5/2011
4-117
Phaser 4600/4620 Printer Service Manual
REP 11.1, REP 11.2
Repairs
Revision - Xerox Internal Use Only
REP 11.1 Mailbox Output Tray
Parts List on PL 11.10 Item 4
Removal
Lift the end of the Output Tray to remove it from the slot on the Mailbox.
Figure 1 Remove the Output Trays
Replacement
Install the Output trays beginning with the lowest tray.
REP 11.2 Mailbox Left Cover
Parts List on PL 11.10 Item 1
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Mailbox Output Trays, REP 11.1.
2. Separate the Mailbox from the printer, GP 14.
3. Remove 1 screw and release 1 hook that secures the Left Cover to the Mailbox, Figure 1.
Figure 1 Remove the Left Cover