5/2011
4-116
Phaser 4600/4620 Printer Service Manual
REP 10.32
Revision - Xerox Internal Use Only
Repairs
10. Remove 4 screws (plastic) that secure the Exit Chute to the chassis.
11. Lift the chute and rest on the support bracket, Figure 2.
Figure 2 Remove the Exit Chute screws
12. Remove 4 screws (metal) that secure the Exit Drive Assembly to the chassis.
13. Disconnect P/J40 to remove the Exit Drive Assembly, Figure 3.
Figure 3 Remove the Exit Drive Assembly
To Next Page
Loading...
