CABLE ROUTING
2-66
1. Hydraulic unit assembly
2. Brake pipe/middle joint assembly
3. Brake pipe (hydraulic unit to metering valve)
4. Brake pipe (hydraulic unit to proportioning valve)
5. Brake pipe/upper joint assembly
6. Brake pipe/lower joint assembly
7. Brake pipe (proportioning valve to rear brake hose)
8. Brake pipe (front brake master cylinder to brake
pipe/lower joint assembly)
9. Brake pipe (brake pipe/upper joint assembly to
front brake calipers)
10. Brake pipe (metering valve to right front brake
caliper)
11. Metering valve
12. Brake hose (rear brake master cylinder to brake
pipe/middle joint assembly)
13. Proportioning valve
A. Position the brake pipe (proportioning valve to rear
brake caliper) within the range shown in the
illustration.
To Next Page
Loading...
