CHASSIS SPECIFICATIONS
2-10
EAS20300
CHASSIS SPECIFICATIONS
Chassis
Frame type Diamond
Caster angle 26.00°
Trail 109.0 mm (4.29 in)
Front wheel
Wheel type Cast wheel
Rim size 17M/C × MT3.50
Rim material Aluminum
Wheel travel 135.0 mm (5.31 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Rear wheel
Wheel type Cast wheel
Rim size 17M/C × MT5.50
Rim material Aluminum
Wheel travel 125.0 mm (4.92 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Front tire
Type Tubeless
Size 120/70 ZR17M/C (58W)
Manufacturer/model METZELER/Roadtec Z8
BRIDGESTONE/BT023F F
Wear limit (front) 1.6 mm (0.06 in) (Europe)
1.0 mm (0.04 in) (AUS)
Rear tire
Type Tubeless
Size 180/55 ZR17M/C (73W)
Manufacturer/model METZELER/Roadtec Z8 C
BRIDGESTONE/BT023R F
Wear limit (rear) 1.6 mm (0.06 in) (Europe)
1.0 mm (0.04 in) (AUS)
Tire air pressure (measured on cold tires)
Loading condition 0–90 kg (0–198 lb)
Front 250 kPa (2.50 kgf/cm², 36 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
Loading condition 90–215 kg (198–474 lb)
Front 250 kPa (2.50 kgf/cm², 36 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
High-speed riding
Front 250 kPa (2.50 kgf/cm², 36 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
Front brake
Type Dual disc brake
To Next Page
Loading...
