FEATURES
1-9
Operation chart
Automatic deactivation of the cruise control system
The cruise control system for this model is electronically controlled and is linked with the other control
systems. The cruise control system will automatically become deactivated under the following condi-
tions:
• The cruise control system is not able to maintain the set cruising speed. (If the traveling speed de-
creases by approximately 10 km/h (6 mph) or more than the set cruising speed)
• The traction control system is turned on and has been activated. (Traction control system indica-
tor/warning light flashes)
• Traction control system is turned off and wheel slip or wheel spin is detected. (The changes in the
vehicle speed signals exceed a preset value.)
• The start/engine stop switch is set to the “
” position.
• The engine stalls.
• The sidestand is extended.
SET SET SET SET
RES
SET
RES
SET
A
C
D
E
F
B
ab dcebfgb
j
hi
A. Operation
B. Indication
C. Speed
D. 180 km/h (112 mph)
E. 50 km/h (31 mph)
F. T i m e
a. Cruise control power switch “ ” “ON”
b. Manual acceleration
c. Push the “SET–” side of the cruise control
setting switch
d. Currently set cruising speed increases
e. Currently set cruising speed decreases
f. New cruising speed is set
g. Currently set cruising speed is canceled
h. Resume operation starts
i. Resume operation finishes
j. Currently set cruising speed
To Next Page
Loading...
