SHAFT DRIVE
4-111
Troubleshooting chart
When causes (A) or (B) shown in the table at the beginning of the “TROUBLESHOOTING” section ex-
ist, check the following points.
YES →
NO ↓
NO →
YES ↓
YES →
NO ↓
1. Place the vehicle on a suitable
stand so that the front wheel is ele-
vated and then spin the front wheel.
Are the wheel bearings damaged?
• Replace the wheel bearing(s).
• Refer to “FRONT WHEEL” on page 4-22.
2. Place the vehicle on a suitable
stand so that the rear wheel is ele-
vated and then spin the rear wheel.
Is the wheel bearing damaged?
Rear wheel bearings and shaft drive bear-
ings are probably not damaged. Repeat
the test or remove and check the compo-
nents.
3. Remove the rear wheel. Are the
wheel bearings damaged?
• Replace the rear wheel bearing(s).
• Refer to “REAR WHEEL” on page 4-31.
Remove and check the drive shaft
components.
To Next Page
Loading...
