Yamaha FJR1300A(D) - Page 339

PICKUP ROTOR
5-38
4. Measure:
• Gap (between the crankshaft position sensor
“1” and pickup rotor “2”) “a”
Out of specification → Reinstall or replace.
5. Install:
• Pickup rotor cover gasket
• Pickup rotor cover
TIP
Tighten the pickup rotor cover bolts in stages
and in a crisscross pattern.
Gap (between the crankshaft po-
sition sensor and pickup rotor)
0.5 mm (0.02 in)
T
R
.
.
Pickup rotor cover bolt
12 Nm (1.2 m·kg, 8.7 ft·lb)
a
1
2
New