Yamaha YZF-R6T - Page 48

CHAS
41
8. Install:
• rod puller
• rod puller attachment
(onto the damper rod )
9. Fill:
•front fork leg
(with the specified amount of the recom-
mended fork oil)
N
O
TE:N
O
TE:
• While filling the front fork leg, keep it upright.
• After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
10.Install:
•nut
• fork spring
• spacer
• damper adjusting rod
• cap bolt
a. Remove the rod puller and adapter.
b. Install the nut.
c. Install the fork spring, and spacer.
d. Install the rod puller and adapter.
N
O
TE:N
O
TE:
Install the spring with the smaller pitch fac-
ing up .
Rod puller
90890-01437, YM-01437
Rod puller attachment
90890-01436, YM-01436
Quantity (each front fork leg)
0.475 L (0.418 Imp qt,
0.502 US qt)
Recommended oil
Suspension oil “01” or
equivalent
Front fork leg oil level (from the
top of the outer tube, with the
outer tube fully compressed and
without the fork spring)
92 mm (3.62 in)
FRONT FORK
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk