9.4 Monitoring Product Life
9.4.2 Operating Procedure
9-16
9.4.2
Operating Procedure
Use the following procedure to display the installation environment and service life prediction
monitor dialog boxes.
1.
Click the Servo Drive Button in the workspace of the Main Window of the Sig-
maWin+.
2.
Select Life Monitor in the Menu Dialog Box.
The Life Monitor Dialog Box will be displayed.
With the Panel Operator or Digital Operator, you can use Un025 to Un02A to monitor this
information.
A value of 100% indicates that the SERVOPACK has
not yet been used. The percentage decreases as the
SERVOPACK is used and reaches 0% when it is time
to replace the SERVOPACK.
To Next Page
Loading...
