YASKAWA T1000A - Page 28

1.3 Model Number and Nameplate Check
28 YASKAWA ELECTRIC SIEP C710616 30B YASKAWA AC Drive T1000A Technical Manual
n Three-Phase 400 V
Note: 1. Refer to Drive Models on page 29 for differences regarding enclosure protection types and component descriptions.
2. Use parameter C6-01 to select Heavy Duty (HD) or Normal Duty (ND) for the application. The default setting is HD.
0169 45 169 0169 37 145
0211 55 211 0211 45 180
0250 75 250 0250 55 215
0312 90 312 0312 75 283
0360 110 360 0360 90 346
0415 110 415 0415 110 415
Normal Duty (C6-01 = 1) Heavy Duty (C6-01 = 0)
No.
Max. Motor Capacity
kW
Rated Output
Current A
No.
Max. Motor Capacity
kW
Rated Output
Current A
0002
<1> IP20 (code B) is available for the following drive models: CIMR-T2A0004 through 0138, CIMR-T4A0002 through 0103.
<2> These units fulfill IP20 requirements and provide wire bending space (space between terminals and cable entry point) as
recommended in the IEC61800-5.
<3> IP20 (code C) is available for the following drive models: CIMR-T2A0169 through 0415, CIMR-T4A0139 through 0362.
<4> These units fulfill IP20 requirements, but the wire bending space provided is lower than recommended in the IEC61800-5.
<5> Drives with these specifications do not guarantee complete protection for the specified environmental condition.
<6> Contact Yaskawa for information about using drives in environments other than specified in this manual.
0.75 2.1 0002 0.55 1.8
0004 1.5 4.1 0004 1.1 3.4
0005 2.2 5.4 0005 1.5 4.8
0007 3.0 6.9 0007 2.2 5.5
0009 4.0 8.8 0009 3.0 7.2
0011 5.5 11.1 0011 4.0 9.2
0018 7.5 17.5 0018 5.5 14.8
0023 11 23 0023 7.5 18
0031 15 31 0031 11 24
0038 18.5 38 0038 15 31
0044 22 44 0044 18.5 39
0058 30 58 0058 22 45
0072 37 72 0072 30 60
0088 45 88 0088 37 75
0103 55 103 0103 45 91
0139 75 139 0139 55 112
0165 90 165 0165 75 150
0208 110 208 0208 90 180
0250 132 250 0250 110 216
0296 160 296 0296 132 260
0362 185 362 0362 160 304
Normal Duty (C6-01 = 1) Heavy Duty (C6-01 = 0)
No.
Max. Motor Capacity
kW
Rated Output
Current A
No.
Max. Motor Capacity
kW
Rated Output
Current A