YASKAWA T1000A User Manual

34 YASKAWA ELECTRIC SIEP C710616 30B YASKAWA AC Drive T1000A Technical Manual
2.1 Section Safety
2.1 Section Safety
W ARNING
Fire Hazard
Provide sufficient cooling when installing the drive inside an enclosed panel or cabinet.
Failure to comply could result in overheating and fire.
When multiple drives are placed inside the same enclosure panel, install proper cooling to ensure air entering the
enclosure does not exceed 50°C.
Crush Hazard
If using a crane or a lifter to transport the drive, make sure that only qualified personnel are allowed operating.
Incorrect operation may cause the drive to suddenly drop, resulting in serious injury.
Only use a crane or a lifter appropriate for the size of the drive unit to transport and install it.
Failure to comply could result in death or serious injury from falling equipment.
CAUTION
Crush Hazard
Do not carry the drive by the front cover or the terminal cover.
Failure to comply may result in minor or moderate injury from the main body of the drive falling.

YASKAWA T1000A Specifications

General

Model	T1000A
Input Frequency	50/60 Hz
Number of Axes	1
Enclosure Rating	IP20
Rated Current	Varies by model
Communication Interface	RS-485
Control Method	Vector control
Protection Features	Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit
Storage Temperature	-20°C
Humidity	5-95% (non-condensing)