4.2 Using the Digital Operator
76 YASKAWA ELECTRIC SIEP C710616 30B YASKAWA AC Drive T1000A Technical Manual
u Menu Structure for Digital Operator
Figure 4.4
Figure 4.4 Digital Operator Menu and Screen Structure
<1> Reverse can only be selected when the drive is set for LOCAL. Details on switching between forward and reverse can be found in
Navigating the Drive and Programming Modes on page 77.
XXXX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
<1>
XX
XX
ALM
DIGITAL OPERATOR JVOP-182
REV DRV FOUT
DRV
XXX
XX
XX
XX
X
XX
X
XX
XX
Note: “XX” characters are shown in this manual.
The drive will display the actual setting values.
Pressing RUN will start the motor.
DRIVE MODE
DRV light is on.
Drive cannot operate the motor.
PROGRAMMING MODE
DRV light is on.
Frequency Reference
Forward Selection
Output Frequency
Output Current
Output Voltage
Monitor Display
Verify Menu
Set Up Mode
Parameter Setting Mode
Auto-Tuning
Reverse Selection
Turn the power on
Description of Key Operations
To Next Page
Loading...
Need help?
General
