3Com 3CRUS2475 - Page 142

142 CHAPTER 7: CONFIGURING VLANS
3 Click . The VLANs are configured, and the device is updated.
To edit VLAN Settings:
1 Click Policy > VLAN > Setup > Modify. The “Modify VLAN Page”
opens:
Figure 68 Modify VLAN Page
The Modify VLAN Page contains the following fields:
■ VLAN ID — Displays the VLAN ID.
■ VLAN Name — Displays the user-defined VLAN name.
■ Disable Authentication — Indicates whether authentication is
enabled for the specific VLAN ID. The possible field values are:
■ Enable — Indicates authentication is disabled for the specified
VLAN ID.
■ Disable — Indicates authentication is enabled for the specified
VLAN ID.
2 Modify the fields.
3 Click . The VLANs are configured, and the device is updated.