158 CHAPTER 8: DEFINING WLAN
■ All — Displays the access points on the network.
■ Name — Displays the user-defined access point name.
■ IP Address — Displays the IP Address assigned to the access point.
■ MAC Address — Displays the MAC Address assigned to the access
point.
■ Type — Displays the antenna type.
■ Radios — Indicates the radio transceiver type. The field values are:
■ A — Indicates the radio type is 802.11a.
■ G — Indicates the radio type is 802.11g.
■ b/g — Indicates the radio type is 802.11b/g.
■ n — Indicates the radio type is 802.11n.
■ Channel — Displays the access point channel used.
■ State — Displays the selected access point transceiver’s status. The
possible field values are:
■ Discovered — Indicates access point was discovered, but was not
activated by the user.
■ Activated — Indicates access point is currently active.
To Next Page
Loading...
