3Com 3CRUS2475 - Page 159

Defining Wireless Access Points 159
To configure Wireless Access Points:
1 Click Wireless > Access Point > Setup. The Wireless Access Point Setup
Page opens:
Figure 78 Wireless Access Point Setup Page
The Wireless Access Point Setup Page contains the following fields:
■ Access Point — Displays the current Access Points.
■ Activation State — Indicates the access point state. The possible
field values are:
■ Activated — Indicates access point is currently active.
■ Discovered — Indicates access point was discovered, but was not
activated by the user.
■ Name — Displays the user-defined access point name.
■ Radio 802.11b/g— Enables High-frequency and longer transmission
ranges.
■ Radio 802.11a— Enables radio 802.11a transmissions.
2 Define the fields.
3 Click . The Access Point is enabled, and the device is updated.