166 CHAPTER 8: DEFINING WLAN
4 Click . Rouge Handling is enabled, and the device is updated.
To view Wireless Rogue Handling:
1 Click Wireless > Rogue Handling > Display. The Rogue Handling
Display Page opens:
Figure 83 Rogue Handling Display Page
The Rogue Handling Display Page contains the following fields:
■ Sort by — Defines the parameter that will be applied to displaying
the table. The possible field values are:
■ SSID — Sorts according to the access point Service Set IDentifier
(SSID) associated with the rogue. The SSID is the name of the ESS
to which the transceiver belongs.
■ Status — Sorts according to the Rogue status.
■ Mac Address — Sorts according to the MAC address associated
with the rogue WLAN device.
■ Radio — Sorts according to the selected Radio Interface.
■ Last Time Heard — Sorts according to the last time the rogue was
detected on wireless network.
■ Channel — Sorts according to the access point channel used from
which the rogue is transmitting.
To Next Page
Loading...
