Defining Multiple STP Instance Settings 235
■ Bridge Priority — Specifies the selected spanning tree instance
device priority. The field range is 0-61440.
■ Designated Root Bridge ID — Indicates the ID of the bridge with
the lowest path cost to the instance ID.
■ Root Port — Indicates the selected instance’s root port.
■ Root Path Cost — Indicates the selected instance’s path cost.
■ Bridge ID — Indicates the bridge ID of the selected instance.
■ Remaining Hops — Indicates the number of hops remaining to the
next destination.
2 Define the fields.
3 Click . The MSTP instance is displayed, and the device is updated.
To configure Multiple STP Configuration Table:
1 Click Policy > Spanning Tree > Multiple STP > Modify Instance. The
Multiple STP Instance Summary Page opens:
Figure 121 Multiple STP Modify Instance Page
The Multiple STP Modify Instance Page
contains the following fields:
To Next Page
Loading...
