8.6 Grounding switch and door locking system 180
8.6.1 Lamp test 181
8.6.2 Door locking system 181
8.7 Optional switchgear and controlgear 183
8.7.1 DC-link disconnector 183
8.7.2 Output switches 183
8.7.3 Manual output isolation 183
8.8 Status messages 184
8.8.1 Start sequence of the drive 186
8.8.2 Stop sequence of the drive 187
8.8.3 Emergency-off sequence 188
8.8.4 Prevention of unexpected startup sequence 188
8.9 Starting the drive 189
8.9.1 Checks before starting the drive 189
8.9.2 Starting the drive remotely 190
8.9.3 Starting the drive locally 190
8.10 Stopping the drive 193
8.10.1 Stopping the drive locally 193
8.10.2 Stopping the drive with the emergency-off function 195
8.10.3 Initiating an emergency-off 195
8.10.4 Starting the drive system after an emergency-off 196
8.11 Arc detection with the Arc Guard System™ (optional) 197
8.11.1 Action after the Arc Guard System™ has been triggered 197
9. CDP control panel 199
9.1 Overview 199
9.1.1 Display and keypad 199
9.1.2 Functions 200
To Next Page
Loading...
