COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
Figure 42: Waiting initial navigation terminus
In such a case, the service is commenced as soon as the bus reaches the location of the starting terminus.
Anyway the service start can be forced by pressing “Force” or “Align” (eventually on a different stop).
When a stop is detected (that is the bus is within the area programmed for a stop) the visualization is turned
into one of those depicted in Figure 43, depending on the service time profile (on schedule, on advance, on
delay).
Figure 43: Stop detection
When the current trip is completed, the screen in Figure 44 is shown for some seconds: after that the
subsequent trip in the current service (if any) is automatically commenced, otherwise the service is closed
and the system returns to the main screen.
To Next Page
Loading...