Agilent Technologies InfiniiVision 3000 X-Series User Manual

406 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
26 I2S Triggering and Serial Decode
2 In the Search Menu, press the Search softkey; then, turn the Entry knob
to select the serial slot (Serial 1 or Serial 2) on which the I2S signals
are being decoded.
3 In the Search Menu, press Search; then, select from these options:
• = (Equal) — finds the specified audio channel's data word when it
equals the specified word.
• != (Not Equal) — finds any word other than the specified word.
• < (Less than) — finds when the channel's data word is less than the
specified value.
• > (Greater than) — finds when the channel's data word is greater than
the specified value.
• >< (In Range) — enter upper and lower values to specify the range to
find.
• <> (Out of Range) — enter upper and lower values to specify range not
to find.
• Errors — finds all errors.
For more information on searching data, see "Searching Lister Data" on
page 128.
For more information on using the [Navigate] key and controls, see
"Navigating the Time Base" on page 60.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English