Alcatel-Lucent 7210 SAS M - Page 520

IES Services Command Reference
Page 520 7210-SAS M Services Guide
Interface commands (applicable for access-uplink mode)
config
—service
— ies service-id [customer customer-id]
— interface
—[no] interface ip-int-name
— address {[ip-address/mask|ip-address netmask} [broadcast all-ones|host-ones]}
—no address
— arp-timeout seconds
—no arp-timeout
— allow-directed-broadcasts
—no allow-directed-broadcasts
— description long description-string
—no description
— icmp
— redirects [number seconds]
—no redirects
— ttl-expired [number seconds]
—no ttl-expired
— unreachables [number seconds]
—no unreachables
— mask-reply
—no mask-reply
— ip-mtu octets
—no ip-mtu
— [no] ipv6
— [no] loopback
—[no] ieee-address
—[no] sap sap-id [create]
—[no] shutdown
—[no] static-arp ip-address [ieee-address]
Interface SAP commands (applicable for access-uplink mode)
config
—service
— ies service-id [customer customer-id] [vpn vpn-id]
—[no] interface ip-int-name
—[no] sap sap-id
— description description-string
—no description
— egress
—[no] filter [ip ip-filter-id]
—[no] filter [ ipv6 ip-filter-id]
— ingress
—[ no ]aggregate-meter-rate rate-in-kbps [burst burst-in-kbits]
—[no] filter [ip ip-filter-id]
—[no] filter [ ipv6 ip-filter-id]
—[no] qos policy-id
—[no] shutdown