Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1051
(hello-interval * hello-multiplier) / 10
This allows the PIMv2 default timeout of 3.5 seconds to be supported.
Values 20 — 100
Default 35
improved-assert
Syntax [no] improved-assert
Context config>service>vprn>pim>interface
config>service>vprn>pim>mdt>default
Description This command enables improved assert processing on this interface. The PIM assert process
establishes a forwarder for a LAN and requires interaction between the control and forwarding
planes.
The assert process is started when data is received on an outgoing interface. This could impact
performance if data is continuously received on an outgoing interface.
When enabled, the PIM assert process is done entirely on the control-plane with no interaction
between the control and forwarding plane.
Default enabled
max-groups
Syntax max-groups value
no max-groups
Context config>service>vprn>pim>interface
Description This command configures the maximum number of groups for which PIM can have downstream state
based on received PIM Joins on this interface. This does not include IGMP local receivers on the
interface. When this configuration is changed dynamically to a value lower than the currently
accepted number of groups, the groups that are already accepted are not deleted. Only new groups
will not be allowed. When this object has a value of 0, there is no limit to the number of groups.
Parameters value — Specifies the maximum number of groups for this interface.
Values 1 — 16000
multicast-senders
Syntax multicast-senders {auto | always | never}
no multicast-senders
Context config>service>vprn>pim>interface
Description This command configures the way subnet matching is done for incoming data packets on this
interface. An IP multicast sender is an user entity to be authenticated in a receiving host.
To Next Page
Loading...
